Having a toilet that needs to be flushed twice is frustrating, wastes water and increases your water bills. If you are in this situation, there are a few things you can do to fix it.
In this blog post, we will discuss the common causes of a toilet that needs to be flushed twice and how to fix it:
Check the Water Level in the Tank
The water level in the tank should be at the proper level for the toilet to flush correctly. If the water level is too low, it will not provide enough pressure to flush the waste down the drain. To check the water level, remove the tank lid and look inside. The water level should be about one inch below the overflow tube. If the water level is low, adjust the float arm to increase the water level. If the float arm is not adjustable, you may need to replace the fill valve.
Check for Clogs
A clogged toilet is a common reason why it needs to be flushed twice. If the toilet is clogged, the water won't be able to flow through the drain, and you will need to flush it again to clear the blockage. To check for clogs:
- Use a toilet plunger.
- Place the toilet plunger over the drain and push down and pull up to create suction.
- Repeat this several times until the clog is cleared.
If the plunger does not work, you may need a toilet auger. An auger is a long, flexible cable inserted into the drain to break used to get rid of the clog. Insert the auger into the drain and slowly turn the handle clockwise until you feel resistance. Continue turning the handle to break up the clog. When you feel the auger go through the clog, pull it out, and flush the toilet to check if it is cleared.
Check the Flapper
The flapper is a rubber valve that opens to let water flow from the tank into the bowl during a flush. If the flapper is not working correctly, it can cause the toilet to be flushed twice. To check the flapper, remove the tank lid and flush the toilet. Watch the flapper to see if it is opening all the way and closing properly. If the flapper is not working correctly, it may need to be replaced.
Check the Trapway
The trap way is the passage that leads from the toilet bowl to the drain line in the floor. If the trap way is blocked, it can cause the toilet to need to be flushed twice. To check the trap way, shine a flashlight into the bowl and look for any visible blockages. If you can see the blockage, use a toilet brush to try and dislodge it. If the blockage is not visible, you may need to use a toilet auger to clear it.
Check the Water Pressure
Low water pressure can also cause a toilet to need to be flushed twice. To check the water pressure, turn on a faucet in another room and see if the water pressure is low. If it is, you may need to contact a plumber to fix the water pressure issue.
A toilet that has to be flushed twice is not only inconvenient but also wastes water and increases your water bills. If you are experiencing this problem, there are several things you can do to fix it. Check the water level in the tank, check for clogs using a toilet plunger or auger, check the flapper, check the trap way, and check the water pressure.
By following these steps, you can fix your toilet and avoid the inconvenience of having to flush it twice. Remember, if you are not comfortable fixing the problem yourself, or if the problem persists, it is always best to contact a licensed plumber to assist you.
Is your toilet constantly getting clogged? Don't fret, as you might just need to master the art of plunging a toilet. Thankfully, The Shroom Company has your back. Our groundbreaking toilet plunger called the ToiletShroom offers the best solution for unclogging your toilet drains, effortlessly removing the blockage in a single action. Get yours today!
More Articles from The Shroom Company
Disclosure: Links in this article are affiliate links to Amazon products. As an Amazon Associate, we earn from qualifying purchases.