A clogged toilet is a very common problem that can be pretty frustrating. There are a few different ways toilets can become clogged, but the most common is when too much toilet paper is used. This can cause the toilet paper to build up and eventually block water flow. Other things that can cause a toilet to become clogged include hair, grease, and other foreign objects. Luckily, there are a few different ways that you can try to unclog a toilet on your own. 

How to Plunge a Toilet

If your toilet is clogged, you'll need a plunger to clear it out. This can be tricky, so it's essential to follow the instructions carefully. 

First, make sure that there is enough water in the toilet bowl to cover the plunger. This will help create a seal so the plunger can do its job. Next, place the plunger over the drain hole and push and pull it up and down. Use a steady rhythm and apply enough pressure to create suction.

Once you think the clog has been cleared, flush the toilet to be sure. If the toilet backs up again, you may need to repeat the process.

How to Plunge a Toilet with Baking Soda and Vinegar

You can plunge a toilet with baking soda and vinegar in a few different ways. The most common method is to simply pour a cup of baking soda into the toilet bowl and then follow it up with a cup of vinegar. Let the mixture sit for a few minutes before flushing the toilet. 

Another way to do it is to make a baking soda and vinegar bomb. Simply mix a cup of baking soda with a cup of vinegar and then put it into a plastic bag. Tie the bag closed and then carefully drop it into the toilet bowl. The mixture will fizz and should help to break up any clogs.

If you have a really stubborn clog, you may need to try a plunger. Put the plunger over the hole in the bottom of the toilet bowl and then push and pull the plunger up and down. The suction from the plunger should help to break up the clog.

How to Plunge a Toilet with Soap and Hot Water

If your toilet is clogged and plunging isn't doing the trick, there's another method you can try before calling a plumber. This method uses soap and hot water to help break up the clog so it can be flushed away. 

First, boil a pot of water and pour it into the toilet bowl. Then, add a cup of dish soap and stir it around to help break up the clog.

Next, place the plunger over the toilet bowl and make sure there's a good seal. Then, start plunging up and down vigorously. The goal is to create enough suction to break up the clog.

After a few minutes of plunging, flush the toilet and see if the water drains properly. If it does, the clog should be gone. If not, you may need to repeat the process a few more times.

Final Thoughts

If you have a clogged toilet, there are a few things you can do to try and fix it yourself. However, if the clog is severe, it's best to call a plumber. To avoid a clogged toilet in the first place, be sure to only flush toilet paper and waste and never flush anything else down the toilet.

Plunge a toilet easily with the help of The Shroom Company. Our ToiletShroom Plunger is the most effective way to clear your clogged toilet drains by pushing out the clog in one simple step. It is designed to mold itself perfectly to fit the vast majority of toilets out there. Buy now!

More Articles from The Shroom Company

Is it Safe to Flush Hair Down the Toilet? What to Know

A Step-by-Step Guide to Unclogging Your Filled Toilet

Plumbing 101: 5 Effective Ways to Fix a Bathroom Sink Clog

Top 5 Bathtub Maintenance Tips That You Should Know About